High Technology Specialty Flooring
Cart 0

AZO ESD Conductive Berber Details

Physical Properties

Surface Resistivity P.T.P. ASTM D257 < 7.5 x 106 ohms
Resistance to Ground EOS-ESD 7.01 < 1.0 x 106 ohms
Charge Decay Time FTMS 4046-101c <<< .17 seconds
Flammability Radiant Panel ASTM E648 .73W/cm², Class I
Noise Reduction Coefficient ASTM 423-90  NRC .25 approx.

 

 

Installation & Maintenance

Follow detailed installation instructions.
Installation Manual PDF format  (151KB)

Install only on sub-floors which have a permanent Moisture Barrier and are dry < 3.0 lb/1000 sft. vapor emissions; 85% rH and with a pH of 7-9 per Moisture Limitation Specification

Rolls:
loose lay as mats  
Install with Sigaway® Electronic full surface conductive dry adhesive or with Sigaway® Original regular dry adhesive with Siga Circuit seam bridging tape.
Install with Uzin KE 2000 SL water based conductive adhesive.

Tiles: Install with full surface Sigaway® dry adhesive
Install with Uzin KE 2000 SL water based conductive adhesive 

Seaming Adhesive
No special seaming adhesive needed

Maintenance
Follow detailed maintenance instructions.  
Maintenance Instuctions PDF format  (118KB)

Limited Warranties
Limited warranties vary by product, and are applicable only if materials are installed professionally on suitable and approved sub-floors Concrete Subfloors and Moisture Testing with approved adhesives and within the approved moisture limits, on sub-floors which have a permanent Moisture Barrier and are dry < 3.0 lb/1000 sft. vapor emissions; 85% rH and with a pH of 7-9 per.