High Technology Specialty Flooring
Cart 0

ESD Conductive Euro-Flex™ Details

Physical Properties

Surface Resistivity P.T.P. ASTM D257 < 5.5 x 107 ohms
Resistance to Ground EOS-ESD 7.01 < 1.0 x 106 ohms
Combination Resistance Person / Heel Grounder/ Flooring ANSI/ESD STM97.1-2006 < 3.5 E07
Charge Decay Time FTMS 4046-101c <<< .17 seconds
Flammability Radiant Panel ASTM E648 .73W/cm², Class I
Residual Indentation LF-475A .002" average
Abrasive Wear, Taber 1000 gm weight H-18 wheels, 5000 cycles 1.1% loss of weight
Abrasive Wear, Taber 1000 gm weight H-18 wheels, to wear layer penetration > 20,000 cycles
Static Coefficient of Friction ASTM D-2047-03 James Test .5 approx
Static Load Limit DIN 16961.2 > 700 p.s.i.
Meets or exceeds minimum requirements of
Federal Specifications for flexibility, dimensional stability, resistance to reagents and residual indentation
LF-475a, SST-312b

 

Installation & Maintenance

Install only on approved sub-floor surfaces

Follow detailed installation instructions.
Installation of ESD Static Control Solid Vinyl Flooring.pdf PDF format (2,580KB)

Install only on sub-floors which have a permanent Moisture Barrier and are dry < 3.0 lb/1000 sft. vapor emissions; 85% rH and with a pH of 7-9 per Moisture Limitation Specification

Rolls:
loose lay as mats
Install with Sigaway® Electronic full surface conductive dry adhesive or with Sigaway® Original regular dry adhesive with Siga Circuit seam bridging tape.
Install with UZIN KE 2000 SL water based acrylic conductive adhesive. 

Tiles:
Install with Sigaway® Electronic full surface conductive dry adhesive or with Install with UZIN KE 2000 SL water based acrylic conductive adhesive. 

Heat welding
Permanently glued rolls must be heat welded
Heat-welding is optional for tiles 

Maintenance
Follow detailed maintenance instructions.  
Cleaning Instructions for ESD Static Control Flooring PDF format (133KB)

Limited Warranties
Limited warranties vary by product, and are applicable only if materials are installed professionally on suitable and approved sub-floors Concrete Subfloors and Moisture Testing with approved adhesives and within the approved moisture limits, on sub-floors which have a permanent Moisture Barrier and are dry < 3.0 lb/1000 sft. vapor emissions; 85% rH and with a pH of 7-9 per.